SD 0150
ABS
SD 0150
SD0150 is one of the styrenic ter polymers (ABS) grades with improved toughness versus HIPS grade. SD0150 exhibits low shrinkage and good dimensional stability. SD0150 is widely used in general injection molding applications. Use this information as a guide to aid you in selecting the proper resin for your application. Mold shrinkage is around 0.4% -0.6% Applications:
- Furniture
- Automotive Parts,
- General Injection Molding
- Appliances Casing
- Office Supplies
Drying: Drying prior to processing is recommended in a desiccant de humidifying hopper dryer. An inlet air dew point of 20°F (-29°C) or below is recommended to achieve a moisture content 0.1%. Typical drying conditions are 2 hours at 180°- 190°F (82° – 88°C). Drying for 4 hours at 160° – 170°F (71°-77°C) is also adequate.
TDS
ABS
To order this product, proceed from the order registration link or contact us at the contact numbers.
FOR ORDER
| PROPERTY | TEST METHOD | UNIT | VALUE |
| MELT FLOW INDEX(200 C/5KG) | ASTM D-1238 | GR/10MIN | 1.8 |
| IZOD IMPACT STRENGTH | ASTM D-256 | KJ/M2 | 22 |
| VICAT SOFTENING POINT(50 N LOAD) | ASTM D-1525 | ℃ | 98 |
| BULK DENSITY | – | KG/M3 | 600 |
| TENSILE STRENGTH AT YEILD | ASTM D-638 | KGF/CM2 | 450 |
| ROCKWELL HARDNESS(AT 23 C) | ASTM D-785 | R.SCALE | 105 |
