EP 548 T
PP CO POLYMER
EP 548 T
″Jampilen EP548T″ is a high melt flow rate, nucleated heterophasic copolymer with a special antistatic additivation used for thin-wall injection molding, IML and houseware applications. The product features improved balance of mechanical properties. The use of ″Jampilen EPX-548T″ allows high productivity due to the easy mold filling and short cycle times.
In comparison with conventional copolymers with the same MFR and the same toughness, ″Jampilen EP548T″ exhibits 15% higher rigidity.″Jampilen EP548T″ is suitable for food contact.
Processing Method:- Injection molding
- High fluidity
- Easy mold filling and short cycle times
- Desirable impact/ stiffness balance
- Good dimensional stability
- Unspecified antistatic properties
- Heterophasic copolymer
- TWIM/IML food containers (Margarine tubs, yoghurt pots, pots for soft cheese, pudding, etc.) Housewares
- Caps and closures
- Flower pots and cool boxes
- Sports, leisure and toys
Share on facebook
Share on twitter
Share on linkedin
TDS
PP CO POLYMER
To order this product, proceed from the order registration link or contact us at the contact numbers.
FOR ORDER
| PROPERTY | TEST METHOD | UNIT | VALUE |
| Physical properties | |||
| Melt Flow Rate (230 oC, 2.16kg) | ASTM D1238 | g/10min | 50 |
| Density | ASTM D1505 | g/cm3 | 0.9 |
| Mechanical | |||
| Flexural Modulus | ASTM D790 | MPa | 1450 |
| Tensile Strength at Yield | ASTM D638 | MPa | 26 |
| Tensile Elongation at Yield | ASTM D638 | % | 5 |
| Izod Impact Strength (notched) at 23 oC | ASTM D256 | J/m | 65 |
| Izod Impact Strength (notched) at -20 oC | ASTM D256 | J/m | 45 |
| Thermal | |||
| Vicat softening point (10N) | ASTM D1525 | oC | 155 |
| H.D.T. (0.46 MPa) | ASTM D648 | oC | 105 |
| Accelerated oven ageing in air at 150 oC | ASTM D3012 | hours | 360 |
