L2102TN42
LDPE
L2102TN42
Product Description:
Low Density Poly Ethylene
General Information:
DSM produces low density polyethylene by the tubular and the autoclave reactor processes. As a result the product range covers a wide variety of densities and melt flow rates. Further it includes a large number of grades with excellent optical properties which yield firm with a high to very high clarity.
Finally there is a wide variety of additives. For example, several grades contain the slip agent erucamide. Films produced from these materials have excellent surface properties and very low odour and taste levels, which is of advantage in e.g. food packaging.
Share on facebook
Share on twitter
Share on linkedin
TDS
LDPE
To order this product, proceed from the order registration link or contact us at the contact numbers.
FOR ORDER
| PROPERTIES | TEST METHOD | UNIT | VALUE |
| Polymer Properties | |||
| Melt Flow Rate | ISO 1133 | dg/min | 1.9 |
| Density | ISO 1183 (A) | kg/m3 | 921 |
| Optical Properties | |||
| Gloss (45˚) | ASTM D 2457 | % | 53 |
| Haze | ASTM D 1003A | % | 11 |
| Clarity | DSM method | mV | 28 |
| Formulation Level | |||
| Slip | DSM method | ppm | 500 E |
| Anti block | DSM method | ppm | 2300 |
| Anti oxidant- | |||
| Processing aid (PPA) – | |||
| Mechanical Properties | |||
| Impact strength | ASTMD 4272 | kJ/m | 18 |
| Tear strength TD | ISO 6383-2 | kN/m | 22 |
| Tear strength MD | ISO 6383-2 | kN/m | 72 |
| Tensile test | ISO R527-1 | ||
| Yield stress TD | 11 | ||
| Yield Stress MD | 12 | ||
| Tensile Stress at break TD | 18 | ||
| Tensile Stress at break MD | 32 | ||
| Strain at break TD | >500 | ||
| Strain at break MD | >100 | ||
| Modulus of elasticity TD | 200 | ||
| Modulus of elasticity MD | 200 | ||
| Coefficient of friction | ASTM D 1894 | 0.1 | |
| Blocking | DSM method | g | ‹ 5 |
| Re-Blocking | DSM method | g | 30 |
